How to Reduce Credit Card Fees on Purchasing Cards
You lower purchasing card fees mainly by sending the transaction data the card brands ask for (Level 2 and Level 3 fields), settling transactions on time so they don't downgrade, and making sure you're on a pricing model that passes the lower interchange through to you. If any one of those three is missing, you can do everything else right and still pay the highest commercial card rate.
Key takeaways
- Purchasing cards often carry some of the highest interchange rates you'll see, but card brands publish lower commercial-card categories for transactions that include enhanced data such as tax, customer code, and line items.
- Lower interchange only reaches you on interchange-plus or similar pass-through pricing. On flat-rate or tiered pricing, the processor may keep the difference.
- Late settlement, authorization mismatches, missing address verification, and junk data fields can downgrade a transaction even when you send Level 3 data.
- Card brand assessments and your processor's markup don't shrink with better data. Only interchange does, so judge savings against interchange alone.
- Run your own volume and ticket size through a calculator before changing anything. The value depends on how much of your volume is actually on commercial cards.
Why purchasing card payments cost more
Purchasing cards (P-cards) are corporate cards that companies and government agencies issue to employees for business buying. The issuing bank takes on more cost and risk on these programs, and it gives the buyer's finance team detailed reporting. Interchange is how that gets paid for, so commercial card interchange categories tend to sit above most consumer debit and many consumer credit rates.
The card brands also want the data that makes P-card programs valuable to the buyer: what was bought, the sales tax, and the buyer's internal reference or PO number. To get that data, the card brands publish lower interchange categories for transactions that include it. That trade, better data for a lower rate, is the main lever you have.
If you sell B2B (wholesale, distribution, manufacturing, contract services, or anything invoiced to businesses or agencies), check how much of your card volume is on commercial cards. That share decides whether the steps below are worth hours of effort or a few minutes.
Where the money goes on a P-card transaction
Every card transaction has four cost layers. Interchange goes to the cardholder's bank and is set by the card brands' published tables. Assessments are card brand fees, a small percentage plus some per-item network fees. The processor's markup is what your processor charges on top. Per-item fees are fixed cents per transaction from the processor, and sometimes from the gateway as well.
Worked example, with all numbers made up for illustration: a distributor runs $80,000 a month in P-card payments across 33 transactions, averaging about $2,424 each. Assume interchange of 2.70% when the transaction goes through with basic data and 2.05% when it qualifies with full Level 3 data. These are example rates, not published card brand rates. The interchange difference is 0.65% of $80,000, or $520 a month, which comes to about $6,240 a year. Assessments, the markup, and the per-item fees stay the same in both cases.
That last point matters when you evaluate any offer. Better data changes only the interchange line. If someone promises savings that are bigger than the interchange gap, ask what else is changing.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
Lever one: send the data the card brands ask for
Level 2 data usually means sales tax amount, a customer code or PO number, and the merchant's tax ID or postal code. Level 3 adds line-item detail: item description, quantity, unit of measure, unit price, commodity code, and line totals. For many purchasing card programs, the larger reductions require the full Level 3 set, not Level 2 alone. Check the specific interchange categories for the card types you actually see.
How you send the data depends on how you take payment. Most countertop terminals and simple hosted checkouts don't send line items. A virtual terminal, an invoicing tool, or a gateway with Level 3 support (many Authorize.net and NMI setups support enhanced data fields when configured to) can send them. Cart platforms like Magento, WooCommerce, or BigCommerce may need a plugin or a custom integration to map order lines into Level 3 fields.
Before you spend money on integration work, estimate the payoff with your own numbers. Our free [Level 2 & Level 3 Card Data Savings Calculator](https://touchsuite.com/tools/level-2-level-3-card-data-savings-calculator) shows what passing enhanced data on business card payments could be worth, based on your monthly volume, the share that's on commercial cards, and your average ticket. You see the estimate right away. The full breakdown is available if you want it.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
What most articles get wrong: the data only helps if your pricing passes it through
Most guides stop at "send Level 3 data and save." That skips the most important question: who keeps the savings? Interchange only drops on your statement if you're billed interchange-plus, or on another model where actual interchange is passed through at cost and the markup sits on top.
On flat-rate pricing, you pay the same percentage whether the transaction qualified for low interchange or not. In the example above, if you pay a flat 3.2%, your $80,000 costs you $2,560 either way. The $520 interchange reduction goes to the processor, not to you. Tiered pricing has a similar problem: the processor decides which bucket a transaction lands in, and commercial cards often land in the most expensive tier no matter what data you send.
So check your pricing model first. If your statement shows a single blended rate, or labels like qualified, mid-qualified, and non-qualified, fix that before you invest in data integration. Otherwise you'll do the technical work and your processor will collect the benefit.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
Run your own numbers
See what passing Level 2 and Level 3 data on business card payments could be worth, using your own numbers.
Open the free Level 2 & Level 3 Card Data Savings Calculator Book a 15-minute callStop the downgrades that erase the savings
A transaction can carry perfect Level 3 data and still fall to a higher category. Common causes: the batch settles too late after authorization; the final amount differs from the authorized amount by more than the brand allows; a card-not-present sale is missing address verification; or the data fails validation.
Watch for data problems in particular. A tax field set to zero on a taxable sale, a placeholder commodity code, or line items that don't add up to the transaction total can all disqualify the rate. If the buyer is tax exempt, use the tax-exempt indicator your gateway supports rather than a blank field.
Two operational habits help most. Settle batches daily. For shipped goods, authorize close to shipment rather than days before, so the amount and timing both match.
Other ways to lower the cost of P-card payments
Large tickets: some card brands publish separate large-ticket categories for high-dollar commercial transactions. These are usually structured as a lower percentage with a higher fixed fee. If your invoices often run to five figures, ask your processor whether your large transactions are qualifying for them. Also tell your processor about large tickets up front. A sudden $40,000 payment from a merchant whose usual ticket is $500 can trigger a risk review, a funding hold, or a reserve request.
Offer ACH to buyers who allow it. Many accounts payable teams can pay by ACH, and ACH is typically priced per transaction rather than as a percentage. Some buyers are required to use their P-card, so treat ACH as an option, not a requirement.
Surcharging is something some B2B sellers consider. Rules vary by card brand, by state, and sometimes by the buyer's own P-card program or contract terms. Confirm with the card brands and your state before you add any fee. It also doesn't lower your processing cost; it only shifts who pays it.
How to confirm it's working
Pull one month of statements from before the change and one from after. On interchange-plus pricing, the interchange detail section lists each category by name. You want to see commercial card volume move out of the standard or basic categories and into the Level 3 or data-rate categories. If most of it stays put, look at settlement timing and data validation before blaming the card brands.
Then compare total interchange as a percentage of commercial card volume, not your overall effective rate. Changes in your consumer card mix can hide a real improvement, or create a fake one. If you want a second set of eyes on a statement or on a Level 3 setup, [talk to a payments specialist](https://touchsuite.com/contact).
Frequently asked questions
Does Level 2 data alone lower fees on purchasing cards?
Sometimes, but often not by much. For many purchasing card programs, the meaningful interchange reductions require full Level 3 line-item data. Check the published interchange categories for the card types you actually receive.
Will Level 3 data lower fees on consumer credit cards?
No. Enhanced data categories apply to commercial cards: business, corporate, purchasing, and some government cards. Consumer card interchange doesn't change based on line-item data.
Can a countertop terminal send Level 3 data?
Usually not in a way that qualifies, because the terminal doesn't capture line items. A virtual terminal, invoicing tool, or gateway configured for enhanced data is the more common route.
Why didn't my fees drop after I started sending Level 3 data?
The most common reasons are flat-rate or tiered pricing that doesn't pass interchange through to you, late settlement, an authorization amount that doesn't match the final amount, or invalid data such as a zero tax field or line items that don't sum to the total.
Is it legal to add a surcharge to purchasing card payments?
Rules vary by card brand, by state, and by the buyer's own program or contract terms. Confirm with the card brands and your state before adding any fee.
How we put this together
The mechanics described here (interchange, assessments, processor markup, per-item fees, and qualification requirements for enhanced data) reflect how the card brands structure their published interchange tables for commercial cards. The rates in the worked examples are illustrative assumptions chosen to show the arithmetic. They are not current card brand rates and not TouchSuite pricing. The calculator uses stated assumptions drawn from published industry ranges, and its results are estimates. Card brands revise interchange and qualification rules periodically, usually in spring and fall, so check the current published tables, your own statement's interchange detail, and your gateway's Level 3 field requirements before deciding. Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.