Level 2 & Level 3 Card Data Savings Calculator
If your customers pay with corporate, purchasing, or government cards, sending extra transaction data may move those sales into lower interchange categories. Enter your numbers to see how many dollars are affected and whether your current setup can likely send the data.
Your estimate
For context
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
The rate difference is your assumption. Interchange categories, qualification rules, and eligibility for enhanced data vary by card brand and change over time. The context cost uses an all-card industry average for your business type, not a commercial-card-specific rate.
Your status
Can your payment method send the data?
Manual entry or automated data?
Level 2 vs Level 3 in plain English
Level 2 data usually adds the tax amount and a customer code or PO number. Level 3 adds line-item detail such as product code, quantity, unit price, and freight. These fields can help business card sales qualify for lower interchange categories; consumer cards generally do not benefit.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
Your Level 2/3 readiness report
Rate sensitivity: dollars affected at different assumptions
| Rate difference (points) | Monthly | Annual |
|---|
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
The rate difference is your assumption. Interchange categories, qualification rules, and eligibility for enhanced data vary by card brand and change over time. The 0.25 to 1.00 point rows are an illustrative range, not published figures.
With 0% business card volume, every row of the rate sensitivity table would be $0, so it is not shown.
Field checklist by level
Level 2 (typical fields)
- Sales tax amount (for tax-exempt sales, use the exempt indicator your processor specifies rather than leaving the field blank)
- Customer code or PO number
- Merchant postal code
Level 3 (Level 2 fields plus)
- Line items, each with product code, description, quantity, unit of measure, unit price, extended amount, and discount
- Freight or shipping amount
- Duty amount
- Ship-from ZIP and ship-to ZIP
Required fields and formats vary by card brand and card type. Your processor and gateway can confirm exactly which fields they expect.
Statement review guide
- Find the interchange detail on your merchant statement. It may be called interchange detail, interchange summary, or card type detail; names vary by processor. If you only see one blended rate or tiers like qualified and non-qualified, ask your processor for an interchange-level report.
- Pick out business card lines. Their names often include words like business, corporate, purchasing, commercial, or government.
- Flag lines labeled with words like standard, non-qualified, or EIRF. These often mark business card transactions that did not get the best category available. Lines that mention Level 2, Level 3, or data rate often indicate enhanced data qualified. Labels vary by processor and card brand.
- Add up the volume on the flagged lines and divide it by your total business card volume. That share is where to start asking questions.
- Compare the rate on a qualified line with a downgraded line for the same card type. That gap is the number to enter as your rate difference in this calculator.
Setup questions for your payment method
Common reasons enhanced data fails to qualify
- Missing or zero tax amount, or a tax-exempt sale not flagged the way your processor specifies
- Blank PO number or customer code
- Line items that do not sum to the charged total once freight, discounts, and tax are included
- Late settlement: batches not settled promptly. Timing rules vary, so ask your processor what applies to your account
- Enhanced data fields that exist in the software but are optional, off by default, or not mapped in the integration
Your prioritized next steps
If large invoices make up much of your business card volume, compare card against ACH with the B2B Invoice Payment Cost Comparison tool.
Opens your browser's print dialog. Choose "Save as PDF" as the destination.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
A specialist can walk through the interchange detail on your statement and how your gateway, software, or terminal handles Level 2 and Level 3 fields. Any rate depends on your card mix and underwriting.
How this calculator works
When a customer pays with a corporate, purchasing, or government card, the card brands set interchange rates partly based on how much transaction detail the merchant sends. A basic authorization includes the card number and amount. Level 2 data typically adds the sales tax amount and a customer code or purchase order number. Level 3 data typically adds line-item detail: product codes, descriptions, quantities, units of measure, unit prices, freight, and discounts. Business cards that arrive with this extra detail may qualify for lower interchange categories than the same sale without it. Consumer cards generally do not get lower rates for extra data, which is why this only matters for business card volume.
This calculator multiplies your business card volume by an assumed rate difference to estimate how many dollars a month are affected by whether enhanced data is sent and qualifies. The default rate difference is a placeholder assumption, not a published figure, so the most accurate result comes from replacing it with the gap you see on your own statement. The tool also gives context using an industry-average effective rate for your business type, and a plain-English check on whether your current acceptance method can typically send Level 2 and Level 3 fields.
The biggest variable is not the formula but execution. Many setups have enhanced data fields available but leave them blank, send a zero tax amount, or send line items that do not add up to the charged total, any of which can cause a business card sale to fall back to a standard category. The readiness report shows what fields each level typically needs, how to find downgraded transactions on your statement, and what to ask your gateway or software provider. Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
The math, step by step
- Business card volume = monthly card volume x business card share.
- Monthly dollars affected = business card volume x your assumed rate difference.
- Annual dollars affected = monthly dollars affected x 12.
- Business card transactions per month = business card volume / average ticket, rounded to a whole number.
- Value per transaction = average ticket x your assumed rate difference.
- Context cost = business card volume x the industry-average effective rate for your business type.
- Share of cost = monthly dollars affected / context cost.
Assumptions used
- Default rate difference for enhanced data: 0.50 percentage points (you can change it, 0 to 2). A placeholder chosen by TouchSuite for illustration only, not a published figure. Replace it with the gap on your own statement.
- Months per year: 12, the calendar convention used to annualize the monthly estimate.
- Industry effective rate by business type: retail 2.55%, restaurant 2.75%, eCommerce 3.15%, services 2.90%, healthcare 2.65%, B2B 2.80%, high-risk 4.25%. Estimates only, from TouchSuite's pricing assumptions; all-card averages, not commercial-card-specific.
- Sensitivity table rate differences: 0.25, 0.50, 0.75, and 1.00 percentage points plus your own value. An illustrative range, not published figures.
- Manual entry threshold: 200 business card transactions per month. An internal rule of thumb used only to choose which note you see; it does not change any dollar figure.
- Business card share: your own estimate. The result is only as accurate as your knowledge of your customer mix or statement detail.
Frequently asked questions
What is the difference between Level 2 and Level 3 card data?
Level 2 typically adds the sales tax amount and a customer code or PO number to the transaction. Level 3 typically adds line-item detail such as product code, description, quantity, unit price, freight, and discounts. Exact field requirements vary by card brand.
Does sending Level 2 or Level 3 data lower rates on consumer cards?
Generally no. Enhanced data matters for business, corporate, purchasing, and government cards. That is why the calculator only applies the rate difference to the business card share of your volume.
Where does the 0.50 percentage point default come from?
It is a placeholder assumption for illustration, not a published figure. The actual gap depends on card brand, card type, ticket size, and current interchange tables. For the most accurate estimate, compare the rate on a qualified business card transaction with a downgraded one on your own statement and enter that difference.
Can my countertop terminal send Level 3 data?
Some terminals can prompt for Level 2 fields like tax and PO number if that feature is enabled. Line-item Level 3 data is uncommon on standalone terminals and is usually sent through a gateway, virtual terminal, or invoicing integration. Check with your terminal provider.
Is enhanced data the same as surcharging?
No. Enhanced data is about sending transaction details so business card sales may qualify for lower interchange. Surcharging and cash discounting are separate practices; rules vary, so confirm with the card brands and your state before using them.
Is this a quote for my business?
No. Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.