All free tools Talk to a specialist
Free tool for contractors and home services

Tip & Card Fee Impact Calculator for Contractors and Home Services

Whether your crews collect tips on a handheld reader or you bill a $9,000 replacement job by invoice link, every card payment carries a fee. This calculator shows contractors and home service businesses what those fees cost per job, on tips, and over a year, using your own numbers.

Your card sales and tips

Used to tailor the guide and for follow-up. It does not change the math.
Total card sales your processor settled last month, tips included. Your processing statement shows this as gross or total card volume. For multiple locations, enter the combined total.
Average card check before the tip is added. Your POS sales summary usually shows this as average check or average ticket.
Your own estimate of the average tip as a percent of the pre-tip check, on card transactions only. Your POS tip report can help. Enter 0 if you don't take tips on cards.
Total fees on your statement divided by total card sales. Example: $2,400 in fees ÷ $80,000 in sales = 3.00%. Leave blank to use the assumed restaurant industry average of 2.75% (an estimate, clearly labeled in your results).
How many locations the monthly card sales above cover.
If you're not sure, choose 'Not sure.' This does not change the math; it helps tailor the guide.
Who processes your cards today. Used only for follow-up context.

Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.

Your fee impact

Enter your numbers to see what card fees cost you on tips, per check, and per year.

How this works: the math and the assumptions

Every figure comes from your inputs and the assumptions listed below. S is monthly card sales including tips, C is the average pre-tip check, t is your average tip as a decimal, r is your effective rate, and L is your number of locations.

Assumptions

How contractors and home service businesses should fill in this calculator

The tool was first built for restaurants, so some field names use restaurant language. The math works the same for a service business. 'Average check size before tip' means your average card charge before any tip: a single cleaning visit, a service call, or one deposit or progress payment. If you split a $12,000 roofing job into a deposit and a final payment, enter the average charge amount, not the full job total, because each charge is its own card transaction.

'Monthly card sales, including tips' is everything run on cards in a typical month, including tips your techs or crews collected on the reader or payment link. Seasonal trades such as HVAC, landscaping, pool service, and snow removal should use an average month, or run the tool twice, once for peak season and once for the slow season. If one large job is bigger than a slow month's total sales, the tool will flag it, so use an average month in that case.

Enter 0% for tips if your trade doesn't take them; per-job and annual fee figures still work. For 'Restaurant type', pick the closest option. It only changes which guide section appears first and does not affect any calculation. 'Number of locations' can be your branches or service territories.

Enter your current effective rate if you have it: total processing fees divided by total card volume on a recent statement. If you leave it blank, the tool uses an assumed 2.75% that is a restaurant industry average, not a home services figure, and labels every result as an estimate. Your own rate gives a far more useful answer.

What drives card fees for contractors and home services

Home service payments look different from a counter sale. Many are card-not-present: card numbers taken over the phone, keyed into a virtual terminal, or paid through an emailed invoice. Card-not-present and keyed transactions often price higher than a chip card tapped or dipped on site. If your techs carry a mobile reader, taking the card in person at job completion can change your mix.

Ticket sizes also vary widely. A carpet cleaner or lawn service may run many small charges, where a fixed per-transaction fee is a meaningful slice of each one. A remodeler or HVAC installer runs fewer, much larger charges, where the percentage rate matters most. Property managers and commercial clients often pay with business or corporate cards, which typically carry higher interchange than consumer debit cards.

Watch your statement for fees that don't scale with your sales: PCI non-compliance fees, keyed-entry surcharges, 'non-qualified' downgrades on tiered pricing, invoice or payment-link fees, monthly minimums, and batch or statement fees. For recurring maintenance plans billed monthly, check whether card-on-file charges are priced differently from in-person ones.

Worked example: a hypothetical home cleaning company

These numbers are hypothetical and for illustration only. A cleaning company runs $40,000 a month on cards including tips, with an average visit of $180 before tip, clients tipping an average of 10% on the card, an entered effective rate of 3.00%, and one location.

The tool would show an average charge of $198 and about 202 card payments a month. Estimated card fees are $1,200 a month, or $14,400 a year. Card tips total about $3,636 a month, and fees on those tips come to about $109 a month, or $1,309 a year, which is 9.09% of total fees. Each visit costs about $5.94 in fees: $5.40 on the cleaning and $0.54 on the tip. Measured against cleaning revenue alone, fees equal 3.30%.

For a no-tip trade, the same logic applies to the ticket. A hypothetical $8,000 HVAC replacement at an assumed 2.75% rate carries about $220 in card fees on that one charge.

Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.

What a good result looks like for contractors and what the full report adds

There is no single right number, but a useful result tells you three things: what a typical job costs you in fees, whether fees on crew tips are large enough to factor into how you pay out tips, and how much each quarter-point of rate is worth per year. In the hypothetical example above, each 0.25 percentage-point change in effective rate is worth $1,200 a year. That figure helps you decide whether a statement review is worth an hour of your time.

The full report, sent after you share your contact details, breaks fees down by branch or territory (assuming sales split evenly), shows a grid of fees across a range of rates and tip levels with your position highlighted, and, if you entered your rate, compares it with the assumed 2.75% average. That comparison is to an assumption, not a quote. The grid points are illustrative, not benchmarks.

One limitation: the tool applies one blended rate to both job and tip. Because per-transaction fees are charged once per payment regardless of tip, fees on tips may be slightly overstated if your statement includes significant per-item fees. For large tickets, the effect is usually small. If you want a line-by-line read of your statement, talk to a payments specialist at TouchSuite.

Frequently asked questions

My techs collect tips on the card reader. Am I paying processing fees on that money even though it goes to the crew?

Generally yes. When a tip is added to a card payment, the processing fee usually applies to the full charged amount, tip included. The calculator estimates how much of your monthly and annual fees comes from tips, so you can see the real cost and decide how to handle it in your tip payout policy.

We take deposits and progress payments on big jobs. How should I enter the average check?

Enter the average size of a single card charge, not the full contract value. If most jobs are paid as a 30% deposit and a 70% final payment, each of those is a separate transaction. Using the per-charge average keeps the estimated number of transactions and the per-charge fee realistic.

Should I push customers to ACH or eCheck for large invoices instead of cards?

For large tickets, bank payments often cost less to accept than cards, and many commercial clients and property managers are used to paying by ACH. Some homeowners still prefer cards for rewards or to spread out payments. Run the calculator to see what card fees cost on a typical large job, then compare that with the cost of offering ACH.

Can I add a surcharge or cash discount to cover card fees on big jobs?

Rules on surcharging and cash discount programs vary, and card brands have their own requirements for disclosure and caps. Confirm with the card brands and your state before adding any fee to customer invoices. The calculator can show what is at stake so you can weigh the decision.

I run a moving company. Does this calculator still apply?

Yes. The math is the same, and movers often see meaningful card tips for crews. Moving is often treated as a higher-risk category in payments underwriting, so your effective rate may differ from other home services. Enter the rate from your own statement rather than relying on the assumed default.

Put this calculator on your website

Restaurant associations, bookkeepers and accountants who serve restaurants, POS resellers, and hospitality consultants can embed this free tip and card fee calculator with one line of code. Your visitors get the same instant per-check and tips-only fee estimates, and it stays up to date automatically.