All free tools En español Talk to a specialist
Free tool for manufacturers

Card vs ACH vs Check: Invoice Payment Costs for Manufacturers

Manufacturers bill large invoices on terms, so the real cost of getting paid comes from three places: card fees on big tickets, staff time spent handling checks, and cash waiting in the mail. Enter your own mix to see which one is costing you the most each month.

Your invoices and payment mix

Sets the default card effective rate if you leave that field blank. Most users of this tool are B2B (wholesale, distribution, manufacturing).
Total dollars collected on invoices in a typical month, across all payment methods.
Typical invoice size. Used to estimate how many payments you process each month.

How customers pay you

Percent of invoice dollars paid by credit or debit card. The three shares must add up to 100%.
Percent of invoice dollars paid by ACH, eCheck, or bank transfer.
Percent of invoice dollars paid by mailed or hand-delivered paper check. The 20 / 30 / 50 starting mix is a placeholder; replace it with yours.
Shares total: 100%

Days from invoice to cash

Days from sending the invoice to funds landing in your bank account. Default is a placeholder assumption; replace it with your own number.
Days from sending the invoice to ACH funds settling. Default is a placeholder assumption.
Days from sending the invoice to the check clearing, including mail time and deposit. Default is a placeholder assumption.

Your card rate

Total card fees for a month divided by total card volume. Leave blank to use the industry average assumption for your business type (2.80% for B2B).

Fees and staff time (assumptions, edit any value)

These start as placeholder assumptions, not facts about your business. Replace them with numbers from your bank statement and your own timing.

What your bank or processor charges per incoming ACH. $0.50 is a placeholder assumption; check your statement.
Bank deposit fees, remote deposit or lockbox fees, and courier or bank trip costs per check. $0.50 is a placeholder assumption.
Loaded hourly cost of the person who handles payments. $25 is a placeholder assumption.
Time to open, match to invoice, post, deposit, and reconcile one check. 10 minutes is a placeholder assumption.
Time to match and post one ACH payment. 3 minutes is a placeholder assumption.
Time to run or match and post one card payment. 3 minutes is a placeholder assumption.

Cost of cash

What money waiting in receivables costs you per year, such as your line of credit rate. 10% is a placeholder assumption.
Who processes your card payments today, if anyone. Helps tailor the report notes.

Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.

What getting paid costs you

Enter your monthly invoiced revenue and average invoice amount to see the comparison.

Why the math is different for manufacturers

Most manufacturers invoice distributors, OEMs, and contractors on net terms. Invoices often run into the thousands of dollars, and almost every payment is card-not-present: a customer keys a purchasing card into a virtual terminal, clicks a pay link on an emailed invoice, sends an ACH from their AP system, or mails a check to your office or lockbox.

Large tickets change which method looks expensive. A card fee is a percentage, so it grows with every dollar on the invoice. ACH and check costs are mostly per payment, so they barely change whether the invoice is $800 or $80,000. Checks bring a hidden cost on top of that: AR staff time to open mail, match remittance stubs to invoices, apply partial payments and credit memos, and make deposits, plus the days the payment spends in the mail and in clearing.

The tool puts all three costs on one line: processing fees, staff time, and a carrying cost on the cash that is still in transit. For most manufacturers, the biggest number is not the one on the processing statement.

Worked example: a hypothetical contract parts manufacturer

All numbers here are hypothetical inputs, not benchmarks. Assume a manufacturer invoices $400,000 a month at an average of $8,000 per invoice (50 invoices). Customers pay 10% by card, 40% by ACH, and 50% by check. Days from invoice to cash: card 5, ACH 35, check 50. Card rate is left blank, so the tool uses its B2B default assumption of 2.8%. ACH costs $1.00 per payment received, each check costs $3.00 out of pocket, staff cost is $40 per hour, staff spend 10 minutes per check and 3 minutes per ACH or card payment, and cost of cash is 9% a year.

Result: card costs about $1,130 a month in fees and staff time, ACH about $60, and checks about $242. But roughly $527,000 is tied up in collection at any moment, which carries about $3,950 a month at 9%. Total monthly cost is about $5,382, or about 1.35% of volume, with a weighted 39.5 days to cash. Because that is over 30 days, the tool would also link to our Merchant Funding Payback Estimator.

Moving half of the check share to ACH (check 25%, ACH 65%) brings the total to about $4,923, saving roughly $458 a month and freeing about $50,000 of cash, with weighted days falling to 35.75. Moving all check volume to card instead would raise the total to about $8,540, an additional cost of roughly $3,158 a month, because a 2.8% fee on $240,000 outweighs the faster cash in this example.

Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.

What manufacturers should check in their card pricing

If your average invoice is $1,000 or more, the full report adds a section on large-ticket card pricing. The key question for manufacturers is whether you pass Level 2 and Level 3 data (tax amount, PO number, line-item detail) on commercial and purchasing card transactions. Many card programs set lower interchange for transactions that carry this data, and missing it can push sales into higher-cost categories. Ask your processor whether your gateway or virtual terminal sends it and whether your statement shows the qualification level.

Look for line items that do not scale with your business: non-qualified or downgrade surcharges, PCI non-compliance fees, monthly minimums, statement and batch fees, annual fees, and ACH return or NOC fees. Enter your true effective rate (total card fees divided by card volume) rather than a quoted rate so the comparison reflects what you actually pay.

If you are considering passing card costs to customers through a surcharge or a cash discount, rules vary by card brand and by state. Confirm with the card brands and your state before changing your invoicing, and consider how key accounts will react.

What a good result looks like for a manufacturer

There is no single right mix. A good result is one where you know where each dollar of cost comes from and have a plan for the largest piece. For many manufacturers that means moving recurring check payers to ACH and keeping card available for smaller accounts, rush orders, deposits, and buyers whose purchasing policy requires a P-card.

Account for how you actually bill. Deposits on custom orders or tooling, progress billing on long production runs, and returns handled through RMAs and credit memos all add staff touches, especially on checks where remittance often does not match the invoice. If your volume swings with customer budget cycles or seasonal production, run the tool on a busy month and a slow month, since cash tied up moves with volume.

If 30% or more of your volume still arrives by check, the gated report emphasizes an ACH, eCheck, and virtual terminal setup checklist. When you are ready to review statements or set up invoice payments, talk to a payments specialist at https://touchsuite.com/contact.

Frequently asked questions

Our big customers pay with purchasing cards and ask for Level 3 data. Does the calculator account for that?

The calculator uses whatever effective card rate you enter, so enter your actual rate from recent statements. It does not model Level 2 or Level 3 qualification directly. If your average invoice is $1,000 or more, the full report includes questions to ask about Level 2/Level 3 data and large-ticket card pricing.

Most of our distributors pay on net 60 no matter how they pay. Will moving them to ACH actually speed up cash?

Only if their payment date changes or the mail and deposit lag goes away. ACH removes time in the mail and in check clearing, but it does not change agreed terms. Enter realistic days for each method. If ACH and check days come out close, the scenario savings will come mostly from lower staff time and per-check costs, not from faster cash.

Can we add a surcharge for customers who pay large invoices by card?

Rules on surcharging and cash discounting vary by card brand and by state, and we do not advise on whether a practice is allowed where you operate. Confirm with the card brands and your state before changing invoices. You can still use the tool to see what card acceptance costs you today.

How should we enter deposits on custom orders or tooling charges?

Include them in monthly invoiced revenue and let them pull your average invoice up or down as they actually occur. If deposits behave very differently from regular invoices, for example paid by card up front while production invoices are paid by check on terms, run the tool twice, once for each stream, and compare.

What should a manufacturer enter for annual cost of cash?

Use the rate you pay to borrow working capital, such as your line of credit rate, or the return you expect from cash used for materials and payroll. This is your own assumption, so try a low and a high value to see how much your result depends on it.

Put this calculator on your website

Accountants, fractional CFOs, bookkeepers, and distribution and manufacturing associations can embed this free card vs ACH vs check comparison with one line of code, so clients can see what their invoice payment mix costs. It stays up to date automatically.