Level 2 & Level 3 Card Data Calculator for Auto Repair Shops
If your auto repair shop services fleet vans, contractor trucks, or city vehicles, some of your card volume likely comes from business, purchasing, or government cards, and how much detail your shop sends with those payments can affect what they cost. Enter your own numbers to estimate the dollars at stake, then check whether your counter, phone, and invoice payments are set up to send that data.
Your estimate
For context
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
The rate difference is your assumption. Interchange categories, qualification rules, and eligibility for enhanced data vary by card brand and change over time. The context cost uses an all-card industry average for your business type, not a commercial-card-specific rate.
Your status
Can your payment method send the data?
Manual entry or automated data?
Level 2 vs Level 3 in plain English
Level 2 data usually adds the tax amount and a customer code or PO number. Level 3 adds line-item detail such as product code, quantity, unit price, and freight. These fields can help business card sales qualify for lower interchange categories; consumer cards generally do not benefit.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
Your Level 2/3 readiness report
Rate sensitivity: dollars affected at different assumptions
| Rate difference (points) | Monthly | Annual |
|---|
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
The rate difference is your assumption. Interchange categories, qualification rules, and eligibility for enhanced data vary by card brand and change over time. The 0.25 to 1.00 point rows are an illustrative range, not published figures.
With 0% business card volume, every row of the rate sensitivity table would be $0, so it is not shown.
Field checklist by level
Level 2 (typical fields)
- Sales tax amount (for tax-exempt sales, use the exempt indicator your processor specifies rather than leaving the field blank)
- Customer code or PO number
- Merchant postal code
Level 3 (Level 2 fields plus)
- Line items, each with product code, description, quantity, unit of measure, unit price, extended amount, and discount
- Freight or shipping amount
- Duty amount
- Ship-from ZIP and ship-to ZIP
Required fields and formats vary by card brand and card type. Your processor and gateway can confirm exactly which fields they expect.
Statement review guide
- Find the interchange detail on your merchant statement. It may be called interchange detail, interchange summary, or card type detail; names vary by processor. If you only see one blended rate or tiers like qualified and non-qualified, ask your processor for an interchange-level report.
- Pick out business card lines. Their names often include words like business, corporate, purchasing, commercial, or government.
- Flag lines labeled with words like standard, non-qualified, or EIRF. These often mark business card transactions that did not get the best category available. Lines that mention Level 2, Level 3, or data rate often indicate enhanced data qualified. Labels vary by processor and card brand.
- Add up the volume on the flagged lines and divide it by your total business card volume. That share is where to start asking questions.
- Compare the rate on a qualified line with a downgraded line for the same card type. That gap is the number to enter as your rate difference in this calculator.
Setup questions for your payment method
Common reasons enhanced data fails to qualify
- Missing or zero tax amount, or a tax-exempt sale not flagged the way your processor specifies
- Blank PO number or customer code
- Line items that do not sum to the charged total once freight, discounts, and tax are included
- Late settlement: batches not settled promptly. Timing rules vary, so ask your processor what applies to your account
- Enhanced data fields that exist in the software but are optional, off by default, or not mapped in the integration
Your prioritized next steps
If large invoices make up much of your business card volume, compare card against ACH with the B2B Invoice Payment Cost Comparison tool.
Opens your browser's print dialog. Choose "Save as PDF" as the destination.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.
A specialist can walk through the interchange detail on your statement and how your gateway, software, or terminal handles Level 2 and Level 3 fields. Any rate depends on your card mix and underwriting.
Why business card data matters more at auto repair shops than you might think
Most auto repair shops have two customer types: drivers paying for their own car, and accounts paying for someone else's vehicle. That second group includes landscaping and plumbing companies, delivery fleets, rental and dealership overflow work, property managers, and municipal or school district vehicles. They tend to pay with business, corporate, purchasing, or government cards, and those are the only cards where Level 2 and Level 3 data can change the cost.
Repair orders are a natural fit for enhanced data. Every ticket already lists parts, labor hours, shop supplies, and sales tax, and fleet customers often need a PO or unit number on the invoice anyway. The question is whether that detail leaves your shop management system and reaches the processor when the card is charged, or whether only a dollar total goes through.
Tickets also vary widely. An oil change and a transmission rebuild can differ by thousands of dollars, and the large jobs are often the ones billed to companies. That is why the calculator asks for your average ticket and your business card share separately instead of assuming a single number for every shop.
Worked example: a hypothetical auto repair shop with fleet accounts
These numbers are hypothetical, not typical or measured figures. Picture a shop running $80,000 a month in card volume, with an estimated 25% from business and fleet-related cards, a $450 average business card ticket, and an assumed rate difference of 0.50 percentage points. Business card volume is $80,000 x 25% = $20,000. Dollars affected per month are $20,000 x 0.50% = $100, or $1,200 a year. That works out to about 44 business card transactions a month and roughly $2.25 per transaction.
If the owner picks the services business type, the tool estimates business card cost at $20,000 x 2.90% = $580 a month, using an all-card industry average rather than a commercial-card rate. The $100 affected is about 17.2% of that estimate. At 44 transactions a month, keying in Level 2 fields such as tax and PO at the counter is usually manageable if the payment screen has them.
Change the assumed rate difference and the result moves in proportion: in this example, 0.25 points is about $50 a month ($600 a year) and 1.00 point is about $200 a month ($2,400 a year). The full sensitivity table is in the report.
Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting. The rate difference is your assumption. Interchange categories, qualification rules, and eligibility for enhanced data vary by card brand and change over time.
Where auto repair shops lose the data: counter, phone, and invoice payments
Counter pickup on a countertop terminal is the most common way repair shops get paid, and standalone terminals often send only the total unless tax and PO prompts are turned on. Line-item Level 3 data is uncommon on terminals, so a shop with heavy fleet volume at the counter should look at whether payments could run through software that already has the repair order.
Phone approvals are another gap. When a fleet manager approves a brake job by phone and reads a card number, staff often key it into a virtual terminal with just the amount. Many virtual terminals have tax and PO fields; whether your team fills them in is a habit question as much as a technology one.
House accounts billed monthly or net-30 are often paid by card later through an invoice link. Whether that invoicing tool passes tax, PO, and parts and labor lines depends on its payment integration, so ask your software provider directly rather than assuming it does.
Reading your results and your statement as an auto repair shop
A good result depends on your mix. A shop that serves mostly retail drivers may see a small figure, and that is useful: it tells you to spend your time on other fees first, such as statement fees, PCI non-compliance fees, or tiered pricing that labels business cards as non-qualified. A shop with fleet contracts or government work may see a figure worth a closer look.
Seasonal swings matter too. Winter battery and tire work, spring tire changeovers, and summer AC repairs can shift your volume, and fleet maintenance may follow its own schedule. Consider running the calculator with a busy month and a slow month so you see a range rather than a single number.
To confirm what is happening today, look at the interchange detail on your statement for business card transactions and note the category names. If you cannot tell, or your statement only shows blended or tiered rates, that is a reason to get the full report or talk to a payments specialist at TouchSuite who can review it with you.
Frequently asked questions
Do fleet cards count as business cards in this calculator?
It depends on the card. Some fleet cards run on the major card networks as commercial cards, and Level 2 and Level 3 data can apply to them. Others run on proprietary fleet networks with their own rules and pricing. Check how your fleet card transactions appear on your statement, and include only the network-branded business card volume in your share if you want a conservative estimate.
Our shop management software already itemizes parts and labor. Does that mean we send Level 3 data?
Not necessarily. The repair order may have every line item, but the payment integration decides what is passed to the processor. Many setups send only the total. Ask your software provider whether card payments send tax amount, PO or customer code, and line items, and then verify on your statement.
We service city and school district vehicles that are tax exempt. How does that affect Level 2 data?
Tax amount is a standard Level 2 field, and how tax-exempt sales are handled varies by card brand and processor setup. Ask your processor how to flag exempt transactions correctly rather than leaving the tax field blank or guessing. Government purchasing cards are also among the cards where Level 3 line items may matter most, so these accounts are worth reviewing first.
Fleet managers often approve repairs and pay by phone. Can those payments still include enhanced data?
Often yes, if the tool you key them into has the fields. Many virtual terminals offer tax and PO or customer code fields for Level 2; line-item Level 3 entry is less common and varies by provider. The quick win is usually training whoever takes phone payments to enter the PO or unit number and tax every time.
We take deposits on special-order parts and later issue refunds for returned parts or cores. Does that change the estimate?
The calculator works from your monthly volume and average ticket, so it does not model deposits or refunds separately. If many fleet jobs are split into a parts deposit and a final payment, your average business card ticket will be lower and your transaction count higher, which affects whether manual entry is practical. Use the average ticket you actually see on business card payments.