All free tools En espaƱol Talk to a specialist
Free tool for moving companies

Processor Switch Break-Even Planner for Moving Companies

Moving companies juggle phone deposits, big balances collected on the truck, storage billing, and peak-season swings, so switching processors is rarely a simple fee comparison. Enter your statement numbers to see what leaving costs, how many months until it pays off, and which steps to take first so no crew is left without a working reader.

Your numbers

Your current processing

Used to show a typical industry effective rate for comparison and, if you skip the savings field, to estimate savings.
Total card sales in a typical month. Your statement usually shows this as gross sales or total volume.
Total fees from your latest statement: processing, monthly, PCI, statement, and gateway fees. Do not include equipment lease payments here.
Used to fill in your cancellation letter template.

What it costs to leave

Look for 'termination', 'cancellation', or 'liquidated damages' in your merchant agreement. Enter 0 if you are month-to-month or don't know yet.
If you know when your contract term ends, we compare paying the fee now versus waiting it out. Leave blank if month-to-month or unknown.
Often billed by a separate leasing company. Enter 0 if you own your equipment or don't lease.
Check your lease agreement or call the leasing company. Enter 0 if no lease.
Any new hardware, setup, or integration work you expect to pay for. Leave at 0 if unknown.

What you expect to save

Type your own figure or paste the monthly savings result from the TouchSuite Fee Savings Calculator. If you leave this blank, enter your average ticket below and we will use an assumption-based estimate.
Monthly volume divided by number of transactions. Used only to estimate savings when you don't enter your own figure.

What you use today

Hardware and software
Check every type of hardware or software you use today.
Subscriptions, memberships, payment plans, or card-on-file customers. These need extra planning when you switch.

Your break-even

Fill in the form to see your exit cost, months to break even, and your first five steps.

What makes the switch math different for moving companies

Most movers run a split card mix. Deposits and booking fees are usually keyed in over the phone or paid through an online quote link (card-not-present), while the balance is often collected at the destination on a mobile reader or tablet (card-present). Card-not-present transactions generally cost more to process, so a company that takes most of its payments by phone will see a different effective rate than one that collects most balances in person.

Tickets are large. A single local move can run several hundred dollars, and long-distance jobs can run into the thousands. That means your per-transaction fee matters very little, while the percentage rate and any markup on top of interchange matter a lot. When the planner shows your current effective rate, that percentage is the number to scrutinize.

Moving is also commonly underwritten as a higher-risk category because customers pay deposits weeks before the service happens and damage or delay disputes can turn into chargebacks. Contracts in this category often carry higher termination fees, reserve holdbacks, and extra line items such as high-risk account fees or chargeback fees. Count all of those in your current monthly cost so the comparison is fair.

Worked example: a hypothetical regional moving company

These numbers are made up for illustration. A mover processes an average of $80,000 a month in card volume with an average ticket of $1,600. Its statements show $3,600 a month in total processing costs, an effective rate of 4.50%, compared with the planner's 4.25% high-risk segment assumption. It owes a $750 early termination fee, pays $65 a month on a reader lease with 20 months left, and expects $200 in one-time setup costs. The owner enters a cautious $400 a month in expected savings.

Upfront switching cost is $750 + (20 x $65) + $200 = $2,250. At $400 a month, break-even is month 6, which falls in the 'Likely pays off within a year' range. The 12-month net is a $2,550 gain and the 24-month net is a $7,350 gain. If the reader lease turns out to be a separate contract owed either way, the switching cost drops to $950 and break-even moves to month 3. With 8 months left on the processing contract, waiting would forgo $3,200 in savings, so switching now comes out ahead by $2,450 in this example.

If the owner had left savings blank and entered only the $1,600 ticket, the planner would use its assumption rates to estimate about $1,355 a month in savings. That figure is labeled assumption-based and does not reflect underwriting, reserves, or your actual card mix, which is why a statement review matters before you act.

Estimates are based on published industry averages and are not a quote. Actual rates depend on card mix, ticket size, industry, and underwriting.

Seasonality, deposits, and storage billing for movers

The planner assumes the same savings every month. For many movers, summer and month-end weeks are far busier than winter. Use a 12-month average for volume and cost rather than your best or worst month, or run the planner twice, once with a peak month and once with a slow month, to see the range.

Timing the cutover matters as much as the numbers. Switching in your slower season gives crews time to learn new readers before the rush. Deposits taken on your old account generally have to be refunded through that same account, so plan to keep it open until booked moves are completed and the dispute window has passed.

If you run storage units or monthly storage plans with saved cards, check the recurring billing box. The gated checklist adds a card-token migration section, because stored customer cards do not always move automatically between processors and a failed migration can mean re-collecting card details from every storage customer.

What a good result looks like for a moving company

A short break-even is good, but for movers the bigger questions are what your current processor holds back and how fees change during peak season. A switch that pays off in a few months on paper can still squeeze cash flow if a reserve is released slowly or a new reserve is required. Ask both sides about reserve terms in writing before you sign.

If the planner returns 'Marginal' or 'Hard to justify,' do not dismiss it. Use the lease buyout questions and the switch-now-vs-wait view to negotiate a lower termination fee or time your exit to the contract's end, and check the auto-renewal notice window so you do not get locked in for another term. To walk through your statements line by line, talk to a payments specialist.

Frequently asked questions

My current processor holds a reserve on my account. Does the planner count that?

No. A reserve is your money held back, not a fee, so the planner does not include it in switching cost. It still affects cash flow. Ask your current processor in writing when and how the reserve is released after you close, and ask any new processor whether a reserve would apply to you.

Our volume roughly triples in summer. What monthly volume should I enter?

Enter a 12-month average from your statements for the main result, since the planner assumes constant savings. Then rerun it with a peak month and a slow month to see how break-even shifts. Your savings and costs should come from the same period as the volume you enter.

We take deposits by phone weeks before the move. What happens to those if we switch mid-season?

Deposits charged through your old account typically need to be refunded through that account if a customer cancels, and chargebacks on them will land there too. Keep the old account open until previously booked moves are completed and the dispute window has passed, and confirm any closure fees with your current processor.

Our crews use leased card readers. Is that lease really a switching cost?

It depends on the contract. Many equipment leases are separate, non-cancelable agreements you owe whether or not you change processors. The main result counts every remaining payment as a cost to be conservative; the gated 'lease owed either way' view removes it so you can compare both scenarios.

Can we pass card fees to customers on a big moving invoice instead of switching?

Surcharging and cash-discount programs are governed by card brand rules and state law, and those rules vary. Confirm with the card brands and your state before charging customers any fee. The planner only compares the cost of staying with the cost of switching; it does not assume any fee is passed on.

Put this calculator on your website

Accountants, bookkeepers, POS resellers, and merchant associations can embed this free break-even planner with one line of code, so clients can check what leaving their processor really costs before they sign anything new. It stays up to date automatically.